TIMBER FRAME HOUSE KIT

Tracing sole 

• Autoclaved or impregnated wood with certified sole;  

• A waterproofing membrane is applied under the soleplate to prevent moisture from passing through the concrete into the wooden structure;

Fasteners

• Wood screws, threaded rods, mechanical and chemical anchors;

• Corners of metal for fastening wooden elements and anchoring the wooden structure to the concrete foundation (calculated in the strength design and CE certified);

Exterior walls

• Timber frame structure 45x145 or 45x200mm;

• Exterior cladding: OSB3, DHF, Vidiwall, fiber cement, or Steico wood rigid thermal insulation boards;

Interior walls

• Timber frame structure 45x100mm non-load-bearing walls or 45x145mm load-bearing walls;  

• Walls can be delivered without cladding or with a single-sided OSB3 or Vidiwall cladding;  

Ground floor

• Posi-joists and lamellar wooden beams of different thicknesses, depending on the openings (openings of up to 9m);

• A layer of 22mm OSB3 over the floor beams;  

Floor above last level

• In the case of a terrace roof, posi-joists or wooden lattice beams are used (the upper sole of which will give the slope of the roof);  

Prefabricated roof structure

• Wooden trusses of various configurations, depending on the architecture: 2, 3, 4 or more slopes;  

• The lower sole of the trusses replaces the ceiling of the last level;  

• For attics: trusses have the great advantage of eliminating the supporting pillars in the middle;

• The cover is mounted on the trusses: a uniform cladding on the entire surface of the roof and can be made of softwood board, OSB roofing board or DHF;